bathroom floor tile DIY – 2021

Why Choose Tony Tling

Our specialists have actually delivered exceptional top quality wall surface as well as floor tiling solutions to the structure market for near to a decade. Tony Tiling excels in providing interior tiling solutions for cooking areas tiling, washrooms tiling and living areas, Residential Tiling and Commercial Tiling. We likewise tile outside locations such as your balcony, alfresco, front patio and also entertainment locations.

DIY tiling: don’t try it before reading these tips from the tradie!

As we invest more time in the house, Irish are getting their tools and diving right into Do It Yourself reno jobs of all sizes as well as shapes. However understanding where to begin can be daunting for even the savviest of renovators, as well as tiles can be specifically complicated if you have actually never ever tiled prior to.

As a remodelling specialist, carpenter as well as The Block alumni, Kyal Demmrich has invested his reasonable share of time diving into DIY renovations with his other half Kara. “We have actually completed more than 35 reno projects now, as well as over that time I’ve discovered that understanding what our end goal is, including the design we’re opting for, really does assist with the remainder forming,” Kyal claims. With the right info and the right devices, the majority of renovations are relatively very easy, specifically when you adhere to a couple of simple tips.

floor tiling

With tiling, once individuals have actually come down on layout aspects like option of tile as well as laying pattern, many of the tough backyards have been run– though caution requires to be required to avoid mistakes such as utilizing improper adhesives, tiling on surfaces that are not dry, and falling short to gauge and also cut accurately.

” There is a wonderful saying in the profession: Procedure twice, cut when. That’s my golden regulation for all points tiles and also Do It Yourself,” Kyal claims. “From determining how many tiles you require, with to the cuts and arrangement of the tiles themselves, never undervalue the relevance of an excellent old tape action and also strong onward intending.”

kitchen tiling

Other tile ‘tricks of the tradie’ offered by Tony Tiling:

Dry surface areas: Before you start, your surface area needs to be dry, tidy, and also smooth. If you are tiling in a damp location, it should be waterproofed correctly prior to you commence tiling.

Tidy tiles are a need to: Tiles should be dry and also totally clean. Any loosened powder on the backs of tiles ought to be gotten rid of to avoid contaminating the adhesive. A fine bristle brush is good to aid with this.

Not all adhesives are produced equivalent: Do not skimp, and also ensure you select the right adhesive for the surface as well as sort of tile. There are lots of brands of adhesive around, and also they are all developed for details sorts of tiles and tile surface areas.

Size does matter for the amateur DIYer: Tiling with huge tiles is difficult, even for seasoned pros. Huge style tiles are heavy as well as are expensive to change if errors are made, so DIY newbies ought to go for tiles no larger than 300 x 600mm.

Start with the grate: The secret with tile design is beginning with the flooring grate (either inside or outside the shower) as well as functioning your means outwards. Attract up a strategy of your floor/wall/splashback and also map out where your tiles will certainly go. At this moment, you must likewise inspect that you have the appropriate be up to the grate. This makes sure that your water will certainly drain pipes away appropriately.

See also  Explanations Why You Need to Re Grout As Opposed to Re Tile Your Bathroom

Dry laying is everything: Dry laying tiles first ensures you have the proper number of tiles as well as producing a vision of exactly how they will certainly look. Dry laying is additionally the perfect time to validate whether you enjoy with your tile choice, or if you need to make last minute modifications.

Lay tiles carefully: Tiles that are positioned unevenly produce an uneven joint (or ‘lip’) which might be a journey hazard– there are levelling products available to aid with this. Make certain you tile the flooring before your wall– wall surface tiles ought to port nicely over your floor tiles. Where silicone is utilized, leave a 2-3mm void where wall surfaces and floorings fulfill.

tiling living room

Peel as well as location innovations: A great item to make your tiling also easier is BT-Instalay CTU by Gripset. This flooring system is a game-changer and can prepare a surface for tiling in just four very easy as well as fast actions. BT-Instalay CTU is also 10 times lighter than concrete sheets, making it an excellent flooring system for DIYers. If you are utilizing it in wet areas, it is also a waterproofing membrane layer.

Cement is a gift: Follow the maker’s directions precisely. Wait a minimum of 24 hours after laying prior to grouting and safeguard the tiles from any type of water or weather by covering them with old tidy sheets. Do not cement where wall surfaces fulfill floorings or where two walls satisfy. Instead, apply silicone when the bordering grouted location is completely dry. Epoxy cement is an amazing option due to its sturdiness and stain resistance. It is a breeze to tidy and also ideal for outside or wet areas, making it an interesting option to seal grout.

Ceramic Tile Flooring in 9 Steps

Here are easy setup suggestions on bathroom floor covering and floor tile that’ll maintain what’s underneath your feet strong and also lengthy enduring.

seen enought?

Contact Us For a Free Quote


Laying tile can be hard on the knees and back


€4 to €8 average price per square foot


6 to 10 hours to tile an 8×10-foot room

Jason has actually been laying tile for thirty years– numerous of them for This Tony Tiling— as well as besides this time around, he’s still rapt with the product. “I like tile,” he says. “It’s stunning and also it does not require much upkeep.”

On a flooring, these slim, fragile slices of ceramic need some unique care and prep work. Or else, they will not make it through the ceremony of feet with an entrance or the abrupt spills in a bathroom or kitchen, where floorings go from bone dry to sopping wet faster than you can say “puddle.”.

Steps on How to Lay Tile

1. Tiling a Floor Overview

tiling floor diy
  • Make every effort for a layout that takes full advantage of the variety of whole tiles and the dimension of any kind of cut tiles.
  • Place them where vanities will cover them later on or out of the main view lines from the doorway when awkwardly sized tiles can’t be prevented.
  • You should not tip on any kind of tiles till the thinset has actually treated for a minimum of 24-hour.
  • Conserve every one of the cuts calling for a wetsaw for last. Rent out the wetsaw for one day.

2. Dry layout

dry layout
  • Find the omphalos of each wall and break chalk lines on the flooring. The line crossing at the space’s center are the starting factor of the tile.
  • Lay a row of tiles along a straightedge extra than midway throughout the room. For consistent joints, make use of tile spacers. This row determines the size of cut tiles along the walls.
  • At the space’s center, place a tile where the chalk lines go across with its edges touching the lines. Measure from one wall (phone call it A) to the local tile side. Now, most likely to the tile row and also, beginning at a joint, measure along the row as well as mark the range you just gauged. The mark shows the width of the tile at the wall. Go back to the center tile and relocate it away from wall surface A to develop a larger cut tile if that dimension is much less than 2 inches.

3. Dry design, Component II.

Dry layout
  • From the facility tile, procedure to the opposite wall surface (call it B; mark this distance along the tile row. Readjust the facility tile along the A-to-B line till measurements at walls An and also B coincide.
  • After adjusting the A-to-B line, mark the center tile where it touches the chalk line in between the other wall surfaces (call them C as well as D). Line up these marks with the C-to-D chalk line. Repeat the measuring and also changing procedure for wall surfaces C as well as D.
  • Lay a straightedge parallel to the C-to-D line as well as against one side of the center tile. Mark the straightedge where it meets an edge of the tile. This mark is your beginning factor for laying tile.
  • Trim door cases with a flush-cut saw so tile can slide underneath. Cut with saw held flat against a tile on top of an item of cardboard (to represent the thickness of the thinset).

4. Spread thinset mortar

Spread thinset mortar
  • Chuck a mixer into a drill and also mix the powdered thinset with latex additive– not water– until it’s the consistency of mayonnaise. Allow it slake (rest) for about 10 minutes. Mix only as much thinset as you can utilize in 2 hours.
  • With the flat edge of a trowel, spread out a thin layer of thinset (scrape coat) over a 2-by-3-foot area next to the straightedge.
  • Prior to the scrape coat dries out, use more thinset using the scratched side of the trowel. Hold the trowel at a 45-degree angle to the floor as well as spread out the thinset uniformly in wide bent strokes, after that complete with a straight pass, which ensures the best bond. Combing the thinset into furrows permits air to escape as the tile is established.

Suggestion: When spreading out thinset, press down hard to make sure that the trowel makes a scuffing noise; the trowel’s notch size need to equal the tile thickness.

See also  floor tile DIY

5. Set the tile

Set the tile
  • Delicately lay a tile on thinset beside the straightedge. With fingertips widespread, lower with a slight twist of the wrist.
  • Use this exact same technique to set each tile, making one row along the straightedge. Utilizing tile spacers guarantees also joints.
  • Move the straightedge out of the way and also lay the following row together with the first, using the edge of the tile as your guide. Proceed spreading thinset as well as establishing tiles in 2-by-3-foot sections, functioning from the center of the room out towards the walls. Every couple of rows, hold a mounting square or A-square along with the side of the tiles to check that they are square to every other.

Tip: Constant finger pressure (as well as continuous method) aids prevent lippage– where a tile’s side is higher or less than its neighbors.

6. Last cuts

final cut
  • Make straight cuts as needed with a snap cutter. When waste is greater than an inch wide, rating tile with one firm stroke, then break by lowering deal with. Smooth cut side with scrubing stone.
  • For straight cuts with waste much less than an inch wide, score tile on snap cutter, after that break pieces off with nibblers or use a damp saw.
  • To fit a tile around an outside corner, hold one edge versus the wall as well as mark the tile where it touches the edge. Pencil a line all the way throughout the tile. Without transforming the tile, move it to the other side of the edge as well as again mark where tile as well as edge satisfy. Mark an X on the part to be cut away.

7. Notch the tile

Notch the tile
  • On a wet saw, cut the tile from the mark to the line, taking care not to exceed the line. Then turn the tile and cut along the line next to the X, as much as but within the initial cut. At end of cut, raise the side farthest from you to assist free the waste.
  • For scribed or rounded cuts, make identical pieces with the damp saw right into the waste section, up to but not past the line noting the cut. Break away the remaining “fingers” with nibblers.

8. Fill the tile joints with cement

Fill the tile joints with grout
  • After tile collections over night, use a margin trowel to remove any type of thinset from the tile surface area or in the joints.
  • Blend a batch of cement to a looser-than-mayonnaise consistency. Include water a little at a time by pressing it from a sponge.
  • Scoop a trowelful of cement onto the floor and also spread it with a rubber float held at a 45-degree angle to the floor. Push grout into the joints by initial moving the float according to the joints, after that angled to them. Job from the sides of the room towards the.

9. Tidying up the cement

Cleaning up the grout
  • Allow the grout to establish up for 20 or 30 minutes. It needs to be solid to the touch prior to you start cleaning the tile’s surface area. Wipe away grout haze with a damp, well-squeezed sponge rinsed usually in a bucket of clean water.
  • Once more, wait for cement to haze over, after that wipe with tidy sponge. Repeat till the tile is clean.

Suggestion: Don’t be as well hostile when cleaning up grout haze, or you can draw grout out of the joints.